Market Leading - 3 Year Instant Replacement Warranty! 
Installing a SkyPod Roof Tent on your vehicle is a fantastic way to enhance your outdoor adventures by providing a comfortable and elevated sleeping area. While the exact instructions can vary slightly depending on your vehicle type and the specific model of SkyPod Roof Tent, the following general steps should guide you through the installation process. Before you begin, ensure you have all the necessary tools and hardware, usually provided with the tent, and consult your vehicle’s manual for roof load capacity and any specific recommendations or restrictions.
Step 1: Check Compatibility and Gather Tools
Compatibility:
Ensure your vehicle’s roof rack or bars are compatible with the SkyPod Roof Tent’s mounting requirements. You need a sturdy, properly installed roof rack or bars to support the tent’s weight and occupants.
Tools:
Typically, you’ll need basic hand tools like wrenches or a socket set. The exact tools required will be listed in the tent’s installation manual.
Step 2: Unpack and Prepare the Tent
Carefully unpack the SkyPod Roof Tent from its packaging.
Identify all components, including the mounting brackets, bolts, nuts, and tools that come with it.
If the tent isn’t already on the roof, you’ll need help lifting it. These tents can be heavy, so having at least one other person assist you is advisable.
Step 3: Position the Tent on the Roof Rack
With help, lift the tent onto your vehicle’s roof rack.
Position the tent so that it is centred on the roof and opens in the desired direction. This is usually towards the rear or the side of the vehicle, but it depends on your preference and vehicle type. Ensure the tent is not obstructing any doors, hatches, or the vehicle’s operation.
Step 4: Attach the Mounting Brackets
Attach the mounting brackets to the tent’s base at the appropriate points. These points are typically pre-drilled or marked on the tent’s base.
Slide the brackets onto the roof bars or rack without fully tightening the bolts, allowing some adjustment.
Step 5: Secure the Tent
Once the tent is properly positioned, and the brackets are in place, secure the tent by tightening all the bolts and nuts. Make sure the tent is evenly balanced and firmly attached to the roof rack. Do not over-tighten, as this could damage the tent or your vehicle.
Step 6: Check and Finalise
Double-check all bolts and nuts to ensure everything is tight and secure.
Open and close the tent to ensure it operates correctly and doesn’t interfere with the vehicle’s function or safety.
Make any necessary adjustments to the positioning or tightness of the installation.
Step 7: Safety Checks and Maintenance
Conduct a safety check to ensure the tent and its installation do not obstruct your vehicle’s lighting, license plate, or safety features.
Regularly check the mounting hardware for tightness and integrity, especially before long trips.
Step 8: Enjoy
With the tent installed, you’re ready to enjoy the great outdoors. Remember to follow the tent’s care and usage instructions to ensure longevity and safety.
It’s important to follow the manufacturer’s specific instructions included with your SkyPod Roof Tent for the best results and to maintain the warranty.