Fenwicks Caravan Cleaner is specifically formulated for cleaning caravans, but it can also be used on cars. Here are a few points to consider before using it on your vehicle:

Effectiveness: Caravan cleaners like Fenwicks are designed to remove stubborn dirt, grime, and algae from the surfaces of caravans, which are often made of similar materials to cars, such as painted metal and plastic.

Safety: Generally, Fenwicks Caravan Cleaner should be safe for use on car surfaces. However, it's always a good idea to test the cleaner on a small, inconspicuous area first to ensure it doesn't cause any adverse reactions, such as damage to the paint or trim.

Instructions: Follow the instructions provided by Fenwicks carefully. Dilute the cleaner according to the recommendations for general cleaning. Avoid using it in direct sunlight or on hot surfaces, as this can cause streaking or damage.

Rinsing: Make sure to rinse the car thoroughly with clean water after using the cleaner to remove any residue, which could potentially harm the finish if left on the surface.

If you find that the cleaner works well on your car without any issues, it can be a good multi-purpose solution for cleaning both your caravan and your vehicle. However, if you have concerns or if your car has a specialized finish, you might want to stick with a product specifically designed for cars.

Using Fenwicks Caravan Cleaner effectively involves a few straightforward steps. Here’s a guide on how to use it:

Preparation:

Park your caravan (or car) in a shaded area to avoid direct sunlight, which can cause the cleaner to dry too quickly and leave streaks.

Ensure the surface is cool to the touch.

Dilution:

For general cleaning, dilute the cleaner according to the instructions on the bottle. A common dilution ratio is 1 part cleaner to 10 parts water, but always check the label for specific guidance.

Application:

Initial Rinse: Rinse the caravan (or car) thoroughly with clean water to remove loose dirt and grime.

Mixing Solution: Mix the diluted cleaner in a bucket of water.

Applying Cleaner: Using a sponge, soft brush, or cloth, apply the cleaner solution to the surface. Start from the top and work your way down to avoid streaks.

Cleaning:

Work in sections to ensure the cleaner doesn’t dry on the surface. Apply the cleaner generously, scrubbing gently to lift dirt and grime.

Pay extra attention to areas with stubborn stains or algae growth, which may require more focused scrubbing.

Final Rinse:

Once the entire caravan (or car) is cleaned, give it a final, thorough rinse with clean water to ensure all cleaning solution is washed off.

Drying:

Dry the surface with a clean, soft cloth or a chamois to prevent water spots.

Post-Cleaning:

For an extra shine and protection, consider applying a suitable wax or polish after the surface is completely dry.

Using Fenwicks Waste Pipe & Tank Cleaner is straightforward and effective for maintaining the cleanliness of waste pipes and tanks in caravans and motorhomes. Here's a step-by-step guide:

Preparation:

Ensure your caravan or motorhome is on level ground to allow the cleaner to work effectively through the system.

Check that the waste water system (pipes and tank) is not in use.

Dilution and Mixing:

Shake the bottle of Fenwicks Waste Pipe & Tank Cleaner well before use.

Dilute the cleaner according to the instructions on the bottle. Typically, the cleaner might be used neat or diluted depending on the severity of the blockage or buildup. Check the specific dilution ratios on the label.

Application:

Direct Application: Pour the required amount of cleaner directly into the waste water tank or down the sink/shower drain so it can flow through the waste pipes.

If you are treating a waste tank, pour the cleaner directly into the tank.

Distribution:

If possible, fill the system with enough water to ensure the cleaner comes into contact with all areas of the pipes and tank. This helps to distribute the cleaner evenly.

Allow the solution to sit in the system for the recommended amount of time as specified on the product label. This is usually around 12-24 hours for maximum effectiveness.

Rinsing:

After the cleaner has had sufficient time to work, thoroughly rinse the waste system with clean water. This involves flushing the waste pipes and tank several times to ensure all residues of the cleaner and loosened debris are removed.

Final Steps:

Check for any remaining blockages or buildup. If necessary, repeat the cleaning process for particularly stubborn deposits.

Once the system is clean, use the waste pipes and tank as normal.