There are 32 reviews with an average rating of
4.91
With poled porch awnings it is sometimes difficult to get a close fitting with the caravan wall. With these limpet fittings there is no problem and that hold in a stiff breeze too.
We could only fit 3 on each side because the limpet coincided with the logo marks. The limpets do need a perfectly smooth surface. No problem though. 3 fitments each side were fine.
Camping World pointed this out and I thought it was a bit of a gimmick but I was completely wrong! It is so easy to attach and prevents the edge of the awning flapping in the breeze at the edges, which causes a lot of noise at night, as well as reducing draughts significantly. They held on tight on my first (light breeze) outing (10-12 mph winds, gusting 20+ mph).
Great little items to keep the awning attached to the caravan. Just make sure you are on a flat surface (no graphics) Adjust the hole position with a material hole punch if you need to. Perfect and value for money.
How have we managed without these for so many years? One word of warning - DO NOT OVERTIGHTEN. In my enthusiasm, I turned them really tight, and of course, the the threaded tube sheared off. Live and learn, I suppose.
Not sure why these cost so much and you'll probably need two packs to allow for breakages and hanging organisers and other stuff, but they do work well at holding awning edges to the caravan and reducing wind access.
Market Leading - 3 Year Instant Replacement Warranty! 
